size 17 MB

A Channel Strip with A-Type EQ, Filters and 436 style Compressor

It has lots of capabilities for tone shaping with its own custom design and internal routing.

There is no line or mic preamp as an input module but INPUT knob will drive EQ circuit’s Gain Trim to get nasty op-amp saturation.

Compressor section based on 436c with extra modifications. Compressor has AMOUNT knob to compression and make-up gain. So, it will be gain compensated.

FEATURES

– INPUT: It will control EQ circuit’s Gain Trim to overload op-amp and get saturation

– HPF & LPF: A-Type filters. HPF 20Hz to 600Hz. LPF 20kHz to 500Hz

– EQUALIZER: A-Type 3 band inductor based eq

– COMPRESSOR: 436c style compressor with modified attack and release times. Also, AMOUNT knob will adjust compression amount and make-up gain at the same time.

– OUTPUT: Clean master volume control

– SYSTEM: This will bypass whole plug-in. Also, each modules have their own bypass buttons. EQ section’s bypass won’t bypass INPUT knob. Only bands will be bypassed independently. So, you can still use saturation.

Resizable interface. Simple “Bottom Right Corner Handle” to resize. 50% to 200%.

*Resizing Tip: When you duplicate plug-in, it will remember current state of GUI size. But if you load new instance, it will be opened at default size. To get rid of this issue, simply follow these steps;

1. Open plug-in for the first time

2. Resize GUI according to your screen resolution or you liking before setting any knobs

3. Save this state as default preset with your DAW

Now, you will be able to load new instances with same size.

(If you want to go default size, simply double click to resize handle.)

Version 1.0 – 16.4.2024

Available Formats

VST3 / AU / AAX Native – Audiosuite | Mac 10.11 or Higher | Intel / Apple Silicon

VST3 / AAX Native – Audiosuite | Windows 10 – 11

Mac Versions require a graphic card that supports “Metal”

Windows Versions require a graphic card that supports “OpenGL”

Home

ATONE WIN MAC_1.0  ( 17 MB )

size 22 MB

Here is first Machine Learning plug-in ‘MoMa’!

It’s fully passive mojo box with Glue & Mojo modes. Also, offers Even & Odd Harmonics modes.

Captured from DIY project.

FEATURES

– MODE

1. G-E: Glue – Even Harmonics

2. G-O: Glue – Odd Harmonics

3. M-E: Mojo – Even Harmonics

4. M-O: Mojo – Odd Harmonics

– AMOUNT: Will set amount of Glue or Mojo

– MIX: Will simply been DRY and PROCESSED signal

Resizable interface. Simple “Bottom Right Corner Handle” to resize. 50% to 200%.

*Resizing Tip: When you duplicate plug-in, it will remember current state of GUI size. But if you load new instance, it will be opened at default size. To get rid of this issue, simply follow these steps;

1. Open plug-in for the first time

2. Resize GUI according to your screen resolution or you liking before setting any knobs

3. Save this state as default preset with your DAW

Now, you will be able to load new instances with same size.

(If you want to go default size, simply double click to resize handle.)

Version 1.3 – 19.3.2024

– Reduced CPU usage

– Fixed noise, drop-out while changing Mode

– Dropped Zip file support

Available Formats

VST3 / AU / AAX Native – Audiosuite | Mac 10.15 or Higher | Intel / Apple Silicon

VST3 / AAX Native – Audiosuite | Windows 10 – 11

Mac Versions require a graphic card that supports “Metal”

Windows Versions require a graphic card that supports “OpenGL”

patreon.com/posts/100041804

MoMa_1.3  ( 22 MB )

BritPre is a classic british Mic/Line preamp with Lowpass and Highpass filters.

It has two modules with independent bypass. Also, it has phase invert button.

• GAIN: Preamp gain -20 to 40dB with 5dB steps.
• OUTPUT: Final output control of plugins. If you bypass preamp section, you can still use output control with filter section.
• HPF: OFF, 45, 70, 160, 360Hz.
• LPF: OFF, 8, 6, 4, 2kHz.
• MIC: Mic Preamp switch. Default position is Line amp.
• PHASE: Phase invert button.
• ANALOG OBSESSION: This label is clickable. It will turn to red and engage Oversampling (4x).

http://analogobsession.com/

BritPre_1.0  ( 16 MB )

BritPre_1.0.pkg  ( 36 MB )

VariMoon is a Fairchild 660 style vari-mu limiting amplifier.
Holy & Simple
Famous 660 compressor/limiter’s limited version with easy to use layout.
True Component & Circuit Modeling
Re-drawing and designing original circuit carefully and emulated original fingerprint of gear with our technology. Carefully designed transformers and tubes.
FEATURES
Input & Output
Controlling input & output signals of plugins.Input knob will affect to compression and harmonic distortion and also character of plugin.
Release
Controls compression time of plugin.6 position stepped knob to control release time. 4 fixed and 2 automatic control.
DC Threshold
Controls compression character.Changing character compressor to limiter. (Smooth compression to hard limination)
AC Threshold
Controls compression level. When it’s at default position,level is around -4dB.

http://www.analogobsession.com/

VariMoonV5_VST_WIN  ( 9 MB )

VariMoonV5_VST_MAC  ( 10 MB )

VariMoonV5_AU_MAC ( 5 MB )

SIZE : You can set spiker and cabinet size and response with SIZE knob. Spiker/Cabinet size can be changed battery-powered guitar amp cab to 1×12. While your spiker size goes to smaller, cabinet size will go smaller, too.

CHARACTER : Will set character of spiker and cabinet. Soft to Punch. Soft will give smoother mid response (mostly low mid) and Punch will give fuller mid response. Not only frequency changes. Also, dynamic response.

MICROPHONE : There is a mic (Modeled Tube Mic) in front of cabinet. You can move it left to right. In default, it’s placed center. You can move mic to right to get off-axis placement.

OUTPUT : Will set main output. Inf to +12dB.

KABIN : It’s also bypass button. Red is active, white is bypassed.

http://analogobsession.com/

KABIN_1.0_VST_WIN  ( 13 MB )

KABIN_1.0_VST_MAC  ( 13 MB )

KABIN_1.0_AU_MAC  ( 7 MB )

Britpressor is a vintage solid-state compressor / limiter with multiband-sidechain. 

• COMPRESSOR THRESHOLD : Will set threshold for compressor section. (Orange labeled knob).
• COMPRESSOR RECOVERY : Release time for compressor section. (Orange labeled knob).
• LIMITER LEVEL : Will set limiting level. (Above of Compressor Threshold).
• LIMITER RECOVERY : Release time for limiter section. (Above of Compressor Recovery).
• GAIN : Make-Up Gain. (Placed after Limiter Section).
• RATIO : Ratio setting for Compressor Section.
• MIX : Blending DRY and WET signals. (Placed after Limiter Section).
• HPF : Will cut lows for internal/external sidechain input. (Only Compressor Section).
• MID : Boost or cut mids (1.6kHz) for internal/external sidechain input. You can boost and get more compression on mids or cut for release mids. (Only Comressor Section).
• HIGH : Boost or cut mids (10kHz) for internal/external sidechain input. You can boost and get more compression on highs or cut for release highs. (Only Comressor Section).
• EXT : Will engage External Sidechain input.

NOTE : Ableton Live (Mac) users should use VST version.

http://analogobsession.com/

Britpressor_2.0  ( 12 MB )

Britpressor_2.0 OSX  ( 30 MB )

LOADED is a custom 500 series channel strip with 5 different units plus main control unit.

• Preamp.
• De-esser.
• Noise-gate.
• EQ section.
• Compressor.

http://www.analogobsession.com/

LOADED_1.0_VST_WIN  ( 39 MB )

LOADED_1.0_VST_MAC  ( 40 MB )

LOADED_1.0_AU_MAC  ( 20 MB )

Two in one!
Two in one unit with filters and eq. Pure solid and discrete emulation of famous units!
FEATURES
3-band inductor-based EQ operation
100Hz low-band, 2.7kHz mid-band, 10kHz high-band
Discrete op-amp models
Carefuly modelled transformers
Variable HPF
Variable LPF
True Component & Circuit Modeling
Re-drawing and designing original circuit carefully and emulated original fingerprint of the gear. Carefully designed transformers and op-amps. Fully emulated line-amp, eq and filters.

combox

COMBOX_4.0_VST_WIN  ( 5 MB )

COMBOX_4.0_VST_MAC ( 5 MB )

COMBOX_4.0_AU_MAC ( 3 MB )

BritChannel is a classic type 73 analog preamp simulator / channelstrip.
One of best designs in the world! Now combined the preamp and the eq in a plugin to reach all futures of this legendary unit.
Re-drawing and designing original circuit carefully and emulated original fingerprint of the gear. Carefully designed transformers and tubes. Fully emulated line/mic-amp and eq.
Version 5.0
– Improved circuit
– Improved GUI
– Lowered CPU usage
– Fixed filter cut-off frequency bump
– Fixed several minor bugs

• PREAMP: Microphone and Line preamp gain control. Fully emulated from original design.
• EQ STAGE: Classic Type 73 design eq and filter with component modeling technology.
• OUTPUT: Clean output fader after output amp to keep original sound after processing.

http://www.analogobsession.com/

Britv5_VST_WiN  ( 11 MB )

Britv5_VST_MAC  ( 11 MB )

Britv5_ AU MAC  ( 6 MB )

Black Beauty
Special Edition of legacy “HLQ” with extra bands but actually not extra!
Original gear has 3 bands with boost and cut but both not at the same time. If you love low boost and cut and want to use at the same time, it’s not possible! Same with mid band and high band!
But, with HLQ-SE you can use all three band’s boost and cut features at the same time!
FEATURES
Low Cut (50Hz) : 6 steps (3dB) low cut
Low Boost (60Hz, 100Hz, 200Hz, 300Hz) : Variable +15dB low boost with selectable four frequency
Mid Cut (0.7kHz, 1kHz, 1.4kHz, 2kHz, 2.8kHz, 3.5kHz, 4.5kHz, 6kHz) : Variable 15dB mid cut with selectable eight frequency
Mid Boost (0.7kHz, 1kHz, 1.4kHz, 2kHz, 2.8kHz, 3.5kHz, 4.5kHz, 6kHz) : Variable 15dB mid boost with selectable eight frequency
High Boost (10kHz) : Selectable (2dB steps) boost
High Cut (10kHz) : Selectable (3dB steps) cut
Oversampling (4x)
Component level filter and line amp emulation

https://www.patreon.com/posts/hlqse-34292290

HLQSE_4.0  ( 25 MB )

HLQSE_4.0 MAC  ( 11 MB )

HLQSE_3.0_VST_WIN  ( 6 MB )

HLQSE_3.0_VST_MAC  ( 7 MB )

HLQSE_3.0_AU_MAC  ( 3 MB )