Free | Win Mac Linux | 22 MB

POP Sound Shaper from Cut Through Recordings provides advanced dynamic control for your productions. Compression and a soft clipper provide emphasis while preserving transients, and set attack and release times guarantee precision. You can select the amount of compression and the threshold, as well as adjust the “Thump” and “Air” tone settings to perfect your track. Enjoy the effortless process of achieving the desired pop sound. The POP Sound Shaper from Cut Through Recordings allows you to precisely customize your productions.

Control attack and release times, compression levels, and adjust tone settings to create the desired pop sound quickly and easily. Push the boundaries of your craftsmanship, and take your tracks to the next level.

Windows, macOS, Linuc VST VST3 LV2 AU AAX

Home

POP_Sound_Shaper_  ( 22 MB )

size 52 MB

Mastering-grade clipping. Lightning-fast workflow.

KClip Zero offers variable clipping curve, and internal oversampling, and can be used on masters, buses, and tracks to achieve transparent loudness, as well as saturation. Features: Industry leading oversampling quality – Mastering grade oversampling, set at 2x for realtime monitoring, with 16x offline bounce. Variable Hard/Soft clipping – Soften control allows you to dial in just the right amount of soft clipping (or leave at 0% for pure hard clipping.)
Gain linking – Match input and output gain as needed…

KClip Zero gives you:
✔️ Transparent competitive loudness (gain extra headroom on your final mix or master)

✔️ Total transient control = more mix glue (tame harsh digital peaks so your tracks can sit better in the mix with less processing)

✔️ The industry’s most powerful clipping algorithm packed inside a foolproof interface

✔️ Mastering-grade oversampling up to 2x online and 16x offline

✔️ All-new visualizer shows clipping amount in real-time

✔️ Resizable window – enhanced visualizer and metering expand to fit your preferred window size

System Requirements
Mac Windows VST VST3 AU AAX

Mac
macOS 10.13.x or higher required
VST, AU, AAX (64 bit) compatible host required
Pro Tools 12 or higher required for AAX version
Apple M1 (or Intel i5 “Ivy Bridge”) CPU or newer strongly recommended
All Kazrog plugins are Universal Binary 2 (native support for both Apple Silicon and Intel architecture.)

Windows
Windows 10 or higher strongly recommended
VST or AAX (64 bit) compatible host required
Pro Tools 12 or higher required for AAX version
Intel i5 “Ivy Bridge” CPU or better strongly recommended

kclip-zero

KClip_Zero_-_3.6.3  ( 52 MB )

size 4 MB

BUILT WITH THE MIXING AND MASTERING ENGINEER IN MIND.

The Clipper has a very simple interface, with just the following parameters: Gain, Trim, and a Hard/Soft switch.

Put the file here:
C:\Program Files\Common Files\VST3

atlas-audio.hu/termek/atlas-clip/

ATLAS-Clipper  ( 4 MB )

size 13 MB

Monster Crab Clipper is the perfect Mastering Soft Clipper for your track.

Using peak clipping, Monster Crab Clipper provides another option of getting transparent loudness during the mastering stage, before the final limiting process. Other than dynamics, Monster Crab Clipper also adds pleasant harmonic distortion, giving the track more warmth, personality and depth. Use it to your advantage and be creative!

Monster Crab Clipper features 2 main knobs: “Gain” controls the input volume, while “Output” controls the output volume after the clipping has been applied. Another 2 smaller knobs are added to allow more control: “Slope” changes how soft/hard the clipper is, while “Oversample” is used to give a cleaner signal with less aliasing. When “Oversample” is turned on, you may turn down the output knob in order to compensate to the loudness increase due to more sonic detail added to the sound.

Software Requirements:
Windows (64-bit only): VST3
macOS (64-bit only): VST3, AU

voxsamples.com/products/free-monster-crab-clipper-plugin

Monster_Crab_Clipper_Plugin-v1.2.0  ( 13 MB )

size 1 MB

Chop n Dice Lite is an easy to use clipper featuring one Hard Clip algorithm.

Adjust the Ceiling slider to set the decibel value where you want your audio to start clipping. Use the “Arc meter” that is along side the ceiling slider to determine where to set the ceiling. Then push the signal with the “Input Gain” slider into the ceiling.

Watch the waveform display area to see what part of the audio is getting chopped. If the waveform is scrolling too fast or too slow for your liking, adjust the “Waveform Scroll Speed” control (red circular slider on top right of the waveform display).

Adjust the mix slider to bring back some of the dry signal into the output. And finally adjust the Output Gain slider to set the final output level of the signal.

Enable HQ (High Quality) mode for 4x oversampling.

VST3 64 bit.

delphidsp.com/

Chop-n-Dice-Lite  ( 1 MB )

size 1 MB  / 3 MB

Rift Clipper is a band splitter distortion.

It allows you to split a signal into individual high and low bands and distort only the high band. It basically turns a “splitting the bass into its high and low material” workflow into a single operation with this plugin. No need to use filters and aux sends to accomplish this task when using Rift Clipper!

• Input gain.
• Drive with 12 dB of clipping gain on the high band.
• Cross-over knob that splits the signal at the desired frequency.
• Mix knob to blend the wet and dry signal.
• Output trim gain.
• AU / VST3.

https://www.patreon.com/ViatorDSP

rift-clipper  ( 1 MB )

Rift-Clipper-Mac-Installer  ( 3 MB )

size 12 MB  / 14 MB  / 15 MB

BT Clipper is a limiter / clipper with three different clipping voices and a mid-range tone knob.

Use this to give your instrument or mix edge and natural compression.

• Input/output faders. Drive into the clipper and trim the output.
• Mid-range tone knob with selectable frequencies between 300 and 5kHz, gain knob to attenuate or boost the mid frequency.
• Toggle to select between the mid-range tone knob coming before or after the clipping circuit.
• Phase toggle to invert the phase.
• Drive knob to control the amount of clipping.
• Menu to select between hard, soft, and analog clipping.
• Auto gain compensation when adding drive.

https://www.patreon.com/ViatorDSP

BT-Clipper  ( 12 MB )

BT-Clipper-Mac  ( 15 MB )

size 12 MB  / 33 MB

Initial Clipper is a soft clipper which prevents your audio signal from going above zero decibels.  

It does this by smoothing the peaks with soft clipping starting from the threshold. The faster and higher the peaks the more you need to bring down the threshold to get a pleasing sound.  Initial Clipper comes with a very handy (and cool looking) peak display. Any peaks that enter the threshold area will have soft clipping applied, hence smoothing them out and taming the loudness.

We also added extra saturation. Because who doesn’t want more saturation!? The positive and negative saturation parameters allow you to add extra harmonic and non-harmonic saturation to your audio signal, this will create that extra fatness and warmth to your sound. Be aware this saturation will decrease your mixes dynamic range as it applies to the whole signal and not just the peaks.

Using a soft clipper on the master channel is very common, therefore we have added an industry standard LUFS (Integrated) Meter so you immediately know how loud your mix is.

initialaudio.com/

Initial-Clipper  ( 12 MB )

Initial-Clipper OSX  ( 33 MB )