size 7 MB  / 22 MB

PREDD is a vintage mic preamp / DI emulation.

• MIC/DI : Will select input section. Mic preamp or DI input.
• PAD : -20dB PAD. Fully gain compensated.
• POLE : Phase invert.
• VOLTAGE GAIN : Selectable main gain knob. Fully gain compensated.
• FINE GAIN SET : Variable +/- 5dB gain for fine settings. Fully gain compensated.
• OUTPUT : Main output knob.
• RUMBLE FILTER : 20 to 180Hz Highpass Filter.
• HF : 10dB high boost.
• ANALOG OBSESSION : Oversampling.

http://analogobsession.com/

PREDD_1.0  ( 7.4 MB )

PREDD_1.0 OSX  ( 22 MB )

TUBA!
Tube mic/line amp with 2 band EQ.
Not 1:1 model of famous console. DIY version of original hardware with mods.
Features:
LEVEL : Input drive. Fully compensated to avoid gain changes.
GAIN : Input drive gain range.
MIC/LINE : Selectable mic preamp or line amp for different characters and colors.
LF : Low frequency with broad shelf around 100 Hz.
HF : High frequency with broad shelf around 8 kHz.
0/180 : Phase switch
PAD : 20 dB pad without affecting gain level. It will increase headroom.
OUTPUT : Clean output

http://www.analogobsession.com/

TUBA_1.0_VST_VST3_WIN  ( 5 MB )

TUBA_1.0_VST_VST3_AU_MAC  ( 3 MB )

Famous solid-state mic preamp with extra DI input and lots of features!
You already know A-Type preamps, right?!
This one is another clone but it has different possibilities to make your own preamp.
FEATURES
– Input : Mic input & simple DI. You can select one of three transformers or discrete mic input. 
Input transformer models : LL1578XL, 2622, OEP A262A3E
– Output : Unbalanced & transformer or simple but effective impedance balanced
Output transformer models : LL5402, OEP A262A7E
– Simple potentiometer or 12 step rotary switch for gain setting
– Possible to use with 500 Series. All you need is simple 500 Series Card Edge Adapter
Adapter 
Also, included 500 Series front panel design. So, you can use it to fit potentiometer/switch and push-buttons. Or you can measure hole placements and make your own panels.
So, it’s up to your choices. You can build it for cheap or expensive. But it won’t let you down even with OEP transformer for input and just impedance balanced output!

http://www.analogobsession.com/

CHEAPRE  ( 0.3 MB )

size 28 MB  / 34 MB

CHANNEV is a channel-strip with mic preamp, de-esser, line-Amp, 4 band equalizer, compressor, limiter and tape saturation!

• Mic preamp with 60dB Virtual Gain, PAD, and Phase Invert. Also, Pre-EQ (Low Shelf/High Shelf) and HPF/LPF.
• De-Esser with Bell and Soft options. It will help you to tame highs!
• 4 Band 81 Style Eq with variable frequency instead limited selectable frequencies. While Low and High bands have bell option, mid bands have Hi-Q option. Also, included Post-Filter same as Pre-Filter.
• Limiter and Compressor based on 2264 but now totally independent and each has its own external side-chain.
• Latest module is Tape Saturation. It will help you add tape saturation and glue overall signal.
• Fixed 2X light oversampling to keep CPU lower
• You can see “ROUTING” to understand signal-chain.

http://analogobsession.com/

CHANNEV_1.2 WIN  ( 28 MB )

CHANNEV_1.2.pkg  ( 34 MB )

size 5 MB  / 8 MB  / 23 MB

MPReq is a vintage microphone preamp with two band fixed frequency program equalizer.

True Component and Circuit Modeling. Re-drawing and designing original circuit carefully and emulated original fingerprint of gear with our technology. Carefully designed transformers and tubes. Fully emulated mic-amp and program eq from the 50’s.

• Microphone preamp gain control.
• Two-bands with boost and cut.
• Low band 100Hz and high band 12kHz

http://analogobsession.com/

MPReq_4.vst.32  ( 5 MB )

MPReq_4.0  ( 8 MB )

MPReq_4.0 OSX  ( 23 MB )