size 4.5 MB

RF-Bassline is a monophonic bass synth for Acid basslines.

A single oscillator monophonic synth with a Lowpass Filter, Distortion and Slide which provides a simulation of the Roland TB-303 vintage analogue bass synthesizer.

Making possible to create complex acid patterns common in classic Acid House, Techno and Trance music.

ronanfed.rf.gd/

RonFed_RF-Bassline  ( 4.5 MB )

size 1 MB  / 5 MB

Bass Station is a monophonic bass synthesizer.

• Two Oscillators that have been carefully modelled to preserve the precise tonal character of the classic sawtooth and square waveforms of the original instruments.
• 12/24 dB Low-pass filter with all the warmth and resonance often lacking in today’s modern digital synthesis methods.
• Intuitive ADSR envelopes.
• Low Frequency Oscillation which can directly control the harmonic content of the sound by pulse width modulation or filter cut-off.
• Oscillator Sync for the most complex and expressive timbres.
• Enhanced Classic panel for greater tweakability:
• The original front panel has been 3D modelled and additional controls have been added for ease of use. The Filter envelope has its own set of ADSR controls and OSC1 and OSC2 have their own section for pitch modulation and PWM control.
• All controls receive MIDI controller numbers for the recording and replay of tweaks during a performance.
• Monophonic.
• 100 “Stunning” Sounds carefully crafted from the Novation factory.
• The Bass Station Plug-In is shipped with the classic originals along with many more totaling 100 sounds for immediate gratification. The patches cover a huge sonic range from screaming leads to phatt funky basses.
• Sounds created in original Bass Stations can be uploaded into Plug In or vice-versa.
• On screen dynamic velocity responsive keyboard. (Mouse position determines velocity).

https://novationmusic.com/en

bassstation-2.3  ( 1 MB )

BassStation-2.3.1 OSX  ( 5 MB )

size 3 MB

RF-AB303 is a monophonic bass synthesizer for acid basslines.

Features a single oscillator monophonic synth with filters and various effects like Parametric EQ, Distortion, Compression, Delay and Reverb that provides a simulation of the Roland TB-303 vintage analogue bass synthesizer and allows an easy step programming in your DAW. Making possible to create complex acid patterns common in classic Acid House, Techno and Trance music.

VST3

https://ronanfed.rf.gd/

RF-AB303_VST3  ( 3.4 MB )

size 0.1 MB

Blowhard is a monophonic lead / bass synthesizer.

n/a

RH-Blowhard  ( 0.1 MB )

size 1 MB

DVS Bass is a monophonic bassline synthesizer.

It comes with an innovative single knob A.D.S.R. envelope control and simple design to enable a wide range of bass sounds to be created quickly.

http://www.dreamvortex.co.uk/

dvs_bass  ( 1 MB )

size 0.9 MB

MM SY 55 LEADER is a monophonic analog synthesizer.

The architecture is quite simple : osc -> filter -> distortion -> amp, but the sounds are very different from this beast. Agressive, ill, manic and brutal are the main aspects of the presets and so the LEADER is best suited for agressive, dark and noisy type of music.

Don’t expect any nice pads or simulations of acoustic instruments from this synth. Fat subbasses , heavy distorted Leads ( hence the name LEADER )and extreme FX are the domain of MM SY 55 LEADER.

This synth is monophonic, no internal effects and everything is controllable with MIDI CC messages.

n/a

mm_sy-55-Leader  ( 0.9 MB )

size 1.2 MB

MM SY 60 Phasedistortar is a monophonic sequenced synthesizer.

3 oscillators with selectable waveforms and morphable variations ( x/y control )and phase distortion, 1 filters with morphing capabilities, warping, distortion and autopan.

4 syncable stepsequencers with slew and velocity control are used to modulate amp, filter, pitch of the osc2 and warp.

The sound of this synth is determined by the 4 sequencers and 4 x/y controls, which can drastically alter the sound of the oscillators. As all sequencers sync to host, the MM SY 60 Phasedistortar is best suited for rhythmic drones, moving pads and machine noises of all kinds.

As the sequencers are all independent from each other, polyrhythmic sounds and technoid loops can be build very easy.

n/a

mm_sy-60-Phasedistortar  ( 1.2 MB )

size 1.2 MB

MM SY 59 VECTORIZOR is a monophonic sequenced synthesizer.

• 2 oscillators with selectable waveforms and morphable variations (x/y control).
• 2 filters with morphing capabilities, ringmodulation, warping and distortion and autopan per oscillator.
• 4 syncable stepsequencers with slew and velocity control are used to modulate amp, filter1, filter 2, ringmodulation and warp.

n/a

mm_sy-59-Vectorizor  ( 1.2 MB )

VK-1 Viking Synthesizer is an authentic emulation of the classic Moog Voyager monophonic analog synthesizer.
It has three continuously variable wave oscillators, two ladder filters with a Dual Lowpass or Highpass/Lowpass configuration, a multi-wave LFO, and two modulation busses. VK-1 uses state of the art DSP technology to accurately reproduce the sound of the hardware.
Presets:
VK-1 comes with 228 presets in the categories Bass, Bright Lead, Electro Bass, FX, Percussive Lead, Soft Lead, and Synthwave. The 50 Electro Bass and 50 Synthwave presets were created by experienced sound designer eXode. The synth excels at thick bass and rich lead sounds.
Oscillators:
At the heart of VK-1 are three adjustable wave oscillators. The continuously variable waveform knob gives the oscillators a unique sound that can’t be achieved with the fixed waveforms found in most synths. A noise oscillator provides three types of noise.
Modulation:
Two modulation busses and an LFO provide flexible modulation capabilities.
Filter:
The filter is a classic transistor ladder filter modeled meticulously. Different drive modes are available for adding grit. The number of poles is adjustable for a wider range of filter sounds.

• VK-1 has cutting edge DSP technology:
• VK-1’s oscillators have been measured from hardware.
• VK-1’s oscillators have drift and jitter.
• VK-1’s oscillators use advanced techniques to avoid aliasing.
• VK-1’s filters are nonlinear ZDF with carefully tuned self-oscillation.
• VK-1’s envelopes have been matched to hardware.

https://blamsoft.com/

VK-1-Viking  ( 50 MB )

VK-1-Viking_MacVST  ( 153 MB )

LittleArpy is a monophonic arp/sequencer.
It takes one note as input and shifts it’s pitch according to a sequence, it DOES NOT collect notes from a chord being played and arpeggiate them.
I made this after trying to recreate the “shimmering waterfalls” sound from Ozric Tentacles which can be heard easily on their song Crackerblocks. Unfortunately, it’s difficult to achieve so I made LittleArpy instead.
The shimmering waterfalls sound can be approximated by making a minor or major sounding sequence and running it at fast speeds (1/64-Dot) through delay and a reverb with mostly only the wet signal on, then moving the Bandpass Filter around.

TED has no (more) website

TED-LittleArpy_32  ( 1.4 MB )

TED-LittleArpy_64  ( 3.1 MB )