99 MB

Aeolus is a Pipe organ emulator using additive synthesis as a VST or AU plugin (or a stand-alone executable).Aeolus was originally developed by Fons Adriaensen and presented in 2004. The original implementation is Linux only and can be found here (or across Linux distribution packages). At present it looks like Aeolus development has been mostly abandoned (but Organnery picked up the original Aeolus project to make it run on a Raspberry Pi).

This project leverages the wavetable systhesis part of the original Aeolus, improves on it, and delivers it as a standard VST plugin using JUCE framework, so that it can be run in Windows/macOS VST3/AU hosts.

This implementation contains additional improvements to the sound generation including

Pipe models can be composed of multiple pipes (to create proper mixtures);
Different pipe models can be used across the keyboard compass (this enables mixtures breaking-back);
Pipes chiff noise is played on attack;
The plugin uses zero delay convolutional reverb with selectable IRs from OpenAir library;
Registration presets also act as a sequencer.
pipes chiff noise on attack;
new pipe models;
convolutional reverb.
The original binary format for the pipe models and the organ configuration has been translated (partially) to JSON.

MIDI Control:

Sequencer steps are controlled via the program change messages sent on the control MIDI channel (program 0 corresponds to the first step of the sequencer, 1 – to the second and so on).

In a DAW you may use Program parameter to control the sequencer steps. Another way to control the sequencer is via key switches (MIDI notes). The default configuration uses keys 22 and 23 to control the sequencer.

CCs:

CC 1 modulation wheel enables/disables tremulant
CC 7 controls the global volume (on the control MIDI channel) and the volume of each division which has swell config flag enabled (on the swell MIDI channel)
CC 91 controls the reverb output level
CC 98 Stops control
👉 The stops control follows the original Aeolus convention. The control mode is set by the message 01mm0ggg, where mm is the control mode, and ggg is the control group (division number, counter from the top starting from 0). Control modes are:

00 Disable the division (all stops are off)
01 Set stop off
10 Set stop on
11 Toggle

Once the control message is received the value of the format 000bbbbb will execute the selected control mode action on specified stop buton bbbbb, counted from 0.

Custom organ configuration:

Custom organ configuration will be loaded by the plugin if found at Documents/Aeolus/organ_config.json location.

👉 The Documents folder’s exact location depends on the operating system and the user profile.

To create the organ_config.json start with default one embedded into the plugin by copying it to Documents/Aeolus folder and renaming to organ_config.json.

It is also possible to use custom pipe configs in .ae0 or .json format. These have to be placed to the Documents/Aeolus folder for then can be referenced from the organ_config.json (use pipe file name without the extension in the”pipe”attribute of the organ_config.json).

Multibus output:

When compiled with the WITH_MULTIBUS_OUTPUT CMake option enabled, the generated plugin will ouput to the 8 separate monofonic buses. Each bus corresponds to the pipes groups placement in space according to the internal horizontal arrangement of the pipes.

In multibus configuration there is no reverb applied, and there is no spatialization performed.

👉 The multibus mode is indended for the object based mixing, where you could place individual pipe groups in space yourself and apply a reverb of your preference.

Pipes are arranged starting from the lowest key from the sides (buses 0 and 7) to the center in the middle of the range (buses 3, 4), and then going back from the centre towards the sides. For the pedal pipes, they go from the outside towards the centre only.

Corresponding pipe position jumps between left and right following the keys (C will be on the left, C# on the right, D of the left, D# on the right and so on).

👉 This very same pipes spatial arrangement is used in the stereo version of the plugin to perform spatialized rendering followed by a stereo convolutional reverb.

https://github.com/Archie3d/aeolus_plugin

size 7 MB  / 8 MB  / 2 MB  / 10 MB

Organ is an electric tonewheel organ emulation.

• Upper MIDI ch 1, Lower MIDI ch 2, Pedals MIDI ch 3 or split keyboard.
• Windows VST/VST3 32/64.
• Mac VST/VST3/AU 64.
• Linux.

socalabs.com/

Organ_Win32  ( 7 MB )

Organ_Win64  ( 8 MB )

Organ_MacVST  ( 5 MB )

Organ_MacAU  ( 2 MB )

Organ_Linux  ( 10 MB )

size 29 MB  / 30 MB  / 10 MB

Harmonus was inspired by a Magnus Model 300 Harmonium / organ (a brand of the “Magnus Harmonica Corporation”) from our collection in perfect condition.

It delivers a warm and unique sound between an accordion and a harmonica. The samples have been meticulously captured in stereo and denoised in order to render all the naturalness of the original organ without the noise of the mechanical fan.

• Quality stereo capture.
• Mode “one finger chord” on the left keyboard or a dedicated channel: one finger for a major chord two for a minor chord.
• The original 2 octaves have been extended to a full 88 keyboard.
• Built-in effects: Reverb, Chorus, Tremolo, EQ.

www.lostin70s.com/

Harmonus_win_32  ( 29 MB )

Harmonus_win_64  ( 30 MB )

Harmonus_osx_64_vst3  ( 10 MB )

Harmonus_osx_64_au  ( 10 MB )

size 24 MB  / 19 MB

SIM-SHENG is a plugin designed to simulate this ancient class of Chinese mouth organs.

The pitch is enabled by a finger covering a hole at the base of the pipe (to get resonance started) but on some complex modern shengs keys are used to make for easier fingering of a wider and chromatic range.

A sheng’s polyphony is determined by the number of reed pipes present and many different numbers of pipes and tuning configurations have existed and are still produced. Also the materials used and the design have an influence on the timbres produced.

quilcom

Quilcom-SIM-SHENG_(32)  ( 24 MB )

Quilcom-SIM-SHENG_(64)  ( 19 MB )

size 0.1 MB

tm000 recreates the world-famous Hammond drawbar organ.

• Tone adjustment by drawbar.
• Reproduction of percussion sounds.
• Reproduction of click noise.
• Reproduction of the delay in sounding each drawbar depending on how fast the keys are pressed.
• The basic waveform can be selected from “sin”, “Saw”, and “Pulse”, and the tone can be adjusted by frequency modulation.
• Equipped with parameters to reproduce the analog feel of the instrument.
• High-pass and low-pass filters are provided.
• Chorus (scana vibrato), tremolo, reverb.
• Velocity sense type can be selected from fixed, sin, and linear.
• Reproduces crosstalk.

https://sites.google.com/view/ttm-works

 

ttm000  ( 0.1 MB )

ttm000_x64  ( 0.1 MB )

Scandiclavia is a virtual analog Nordish organ module.
It works in an open mixer format and enhanced with some new exciting features. First, an improved 2 32bit top quality waveform engine with incredibly high dynamic range oscillators to generate 2 organ modules emulation, each with it’s own size and color: precision organ and hammond style electric organ. Scandiclavia is inspired by the great Nord hardware organs sound, although using slightly different synthesis approach.
The Engine:
The 2 oscillators can be mixed together into a punchy, clicky and aggressive organ sound, allowing the player creating very useful and musical organ combinations, articulations and textures. Scandiclavia oscillators has full synthesis section, 2 different midi velocity options, stereo enhancer engine, new gleam effect, a user friendly global hipass-lopass filters per oscillator.
The effects:
Scandiclavia also offers a full section of built in effects (stereo widener, chorus, phaser, wha-wha, reverb and delay), advanced midi mode and dedicated organs alike draw-bars system.

https://www.fananteampro.com/

ScandiClavia  ( 6 MB )

ScandiClavia_64  ( 7 MB )

HaNon B70  is a emulates the famous Hammond B3 drawbar organ coupled with a Leslie 122 rotating speaker.
It’s based on the physical emulation of the 91 tonewheels, which rotate permanently at low CPU cost. This allows to have natural keyClicks and low cost simple synthesis.
HaNon B70 :
The Leslie emulates a tube preamp, a tube power amp and 2 rotors with first reflections in the leslie case.

• 91 tonewheels permanently active.
• Simulation of the tube amplification stage and drive to “crunch” the organ.
• Natural Key Clicks (but adjustable).
• Adjustable percussions level, decay and harmonic.
• Adjustable reverb.
• Chorus and Vibrato.
• L122 frequency response.
• Leslie slow / fast on message from MIDI controller 1.
• 2 channels and two sets of drawbars and a split with MIDI learn for playing with a single keyboard.
• 44100, 48000, 88200, 96000, 176400 and 192000 Hz compatible.

https://www.lostin70s.com/#/plugins

HaNonB70_win_32  ( 11 MB )

HaNonB70_win_64  ( 12 MB )

HaNonB70_osx_64_vst3  ( 7 MB )

HaNonB70_osx_64_au  ( 7 MB )

CollaB3 is a Hammond B3 vintage tonewheel organ emulation.
CollaB3 features a detailed reproduction of noises, clicks, leakage, rotary speaker and tonewheel. Also chorus and reverb are included.

• Virtual Tonewheel Organ.
• Leakage emulation.
• Rotary speaker emulation.
• No velocity-switching.
• Chorus, Reverb and Percusion included.
• Scalable HD interface.
• Standalone versions included.

https://sampleson.com/

CollaB3-Installer  ( 60 MB )

CollaB3-Installer-osx  ( 58 MB )

size 17 MB  / 20 MB

 Scandiclavia 2 is a bigger and richer successor to the first Scandiclavia virtual analog nordish organ model.

It yet works as an open mixer format like the previous, but now with 7 waveforms per channel, enhanced sound path and some more new exciting features.

The main sound engine uses the same 32-bit top quality oscillators as the previous, with the highest possible dynamic range and 7 waveforms per oscillator. The waveforms emulate the great Nord organs of all times and can be mixed together and create a vast of sound colors, textures and articulations. Scandiclavia oscillators also include gleam effect, a user friendly global hipass-lopass filters per oscillator, a rotary speaker emulation, drawbars, hammer generator (click) and a rich effects rack.

ScandiClavia got an exclusive hammer manager which manages the percussive effect of the organ’s hammer. You can choose from 7 types from dull to noisy and determine every little nuance of the hammer.

Scandiclavia also offers a full section of built in effects (a new cabinet effect with 4 different cabinets emulation, chorus, phaser, wha-wha, reverb and delay).

https://www.fananteampro.com/

ScandiClavia2  ( 17 MB )

ScandiClavia2_(64)  ( 20 MB )

Euthymia Electronic Organ V2 is a VST HAMMOND organ clone.

The Euthymia Organ is a Hammond Clone Simulation. Clean Sine Drawbars for 2 Manuals and Bass Pedals, 2 Percussion Oscs with the 9 “Standard” Harmonics, a Key Click Imitation, Vibrato/Chorus, the Overdrive and all the work behind the Graphics made this instrument more professional.

• 147 Notes Polyphony.
• 9 Steps Drawbars.
• 9 “Standard” Drawbars for the Upper Manual, 9 for the Lower and 4 for the Pedal (16′, 5 1/3′, 8′, 4′) with a Clean Sine Sound.
• 2 Percussion Oscs with the 9 “Standard” Harmonics. Adjustable Decay and Level. A Knob switches Off/On.
• Key Click Imitation (for both Manuals). Adjustable Attack/Release, Carrier and Level.
• Vibrato/Chorus. Adjustable Mix, Speed, Depth and Delay. A Knob works as a Selector between Vibrato and Chorus. 2 Knobs are available for Off/On. One for the Upper and one for the Lower Manual.
• Midi Channel Selectors for the 2 Manuals and the Pedal.
• Adjustable High, Tone, Tune and Level.
• 32 Programms available.
• A LCD Screen.
• Vintage Look GUI.
• Low CPU consumption.

Euthymia_Electronic_Organ ( 1.99 MB )